Note: 3D graphics powered by the jsc3d project under the terms of the MIT license.
“You see things; and you say, ‘Why?’
But I dream things that never were;
and I say, ‘Why not?’"
George Bernard Shaw (the Serpent
in Back To Methuselah)
The Distribution Line Set of the 3DToolBox, consists of
- Insulators
- Crossarms
- Bolts
- Fittings
- Hardware
The insertion points of the Units are at the center of the base. Node snap points are located at the terminal points.
The Distribution Line Set
Select a Block from the list at right.
Leftclick mouse to Spin
Ctrl+Leftclick to Pan
Mouse wheel to Zoom
|
BltCg38x4 |
Bolt, Carriage, 3/8x4" |
|
BltCg58x7 |
Bolt, Carriage, 5/8x7" |
|
BltDA58x12 |
Bolt, Double Arming, 5/8x12" |
|
BltDA58x14 |
Bolt, Double Arming, 5/8x14" |
|
BltDA58x16 |
Bolt, Double Arming, 5/8x16" |
|
BltDA58x18 |
Bolt, Double Arming, 5/8x18" |
|
BltDA58x20 |
Bolt, Double Arming, 5/8x20" |
|
BltDA58x22 |
Bolt, Double Arming, 5/8x22" |
|
BltDA58x24 |
Bolt, Double Arming, 5/8x24" |
|
BltDU58x10 |
Bolt, Double Upset, 5/8x10" |
|
BltDU58x12 |
Bolt, Double Upset, 5/8x12" |
|
BltDU58x14 |
Bolt, Double Upset, 5/8x14" |
|
BltDU58x16 |
Bolt, Double Upset, 5/8x16" |
|
BltDU58x8 |
Bolt, Double Upset, 5/8x8" |
|
BltEN58 |
Bolt, Eye Nut, 5/8" |
|
BltEy58x10 |
Bolt, Eye, 5/8x10" |
|
BltEy58x12 |
Bolt, Eye, 5/8x12" |
|
BltEy58x14 |
Bolt, Eye, 5/8x14" |
|
BltEy58x16 |
Bolt, Eye, 5/8x16" |
|
BltEy58x18 |
Bolt, Eye, 5/8x18" |
|
BltEy58x8 |
Bolt, Eye, 5/8x8" |
|
BltLS12x4 |
Bolt, Lag Screw, 1/2x4" |
|
BltMa58x10 |
Bolt, Machine, 5/8x10" |
|
BltMa58x12 |
Bolt, Machine, 5/8x12" |
|
BltMa58x14 |
Bolt, Machine, 5/8x14" |
|
BltMa58x16 |
Bolt, Machine, 5/8x16" |
|
BltMa58x18 |
Bolt, Machine, 5/8x18" |
|
BltMa58x20 |
Bolt, Machine, 5/8x20" |
|
BltMa58x8 |
Bolt, Machine, 5/8x8" |
|
BltNt58 |
Bolt, Nut, 5/8" |
|
BrcAA60 |
Brace, Alley Arm, 60" |
|
BrcSt26 |
Brace, Strain, 26" |
|
BrcWb60 |
Brace, Wishbone, 60" |
|
ClpAn1.125 |
Clamp, Angle, 1.125" |
|
ClpAn1.95 |
Clamp, Angle, 1.95" |
|
DedFl2AA |
Deadend, Flexible, 2AA |
|
DedFl30AA |
Deadend, Flexible, 3/0AA |
|
DedQd33AC |
Deadend, Quad, 336AC |
|
DedRg2AA |
Deadend, Ridgid, 2AA |
|
DedRg30AA |
Deadend, Ridgid, 3/0AA |
|
DedRg33AA |
Deadend, Ridgid, 336AA |
|
DedWg2AA |
Deadend, Wedge, 2AA |
|
DedWg33AA |
Deadend, Wedge, 336AA |
|
DedWg63AA |
Deadend, Wedge, 636AA |
|
FtgCvSy |
Fitting, Clevis, Secondary |
|
FtgFGTE18 |
Fitting, Fiberglass, Thimble Eye, 18" |
|
FtgPnArLg |
Fitting, Pin, Anchor, Long |
|
FtgPnArSh |
Fitting, Pin, Anchor, Shackle |
|
FtgPnFg18 |
Fitting, Pin, Fiberglass, 18" |
|
FtgPnPT |
Fitting, Pin, Pole Top |
|
FtgPnSa |
Fitting, Pin, Saddle |
|
FtgPnTx |
Fitting, Pin, Transformer |
|
FtgThAd |
Fitting, Thimble, Adaptor |
|
InsDiPmSt52- |
Insulator, Distribution, Polymer, Strain, ANSI TR52 |
|
InsDiPrDe52- |
Insulator, Distribution, Porcelain, Deadend, ANSI TR52 |
|
InsDiPrPn55- |
Insulator, Distribution, Porcelain, Pin, ANSI TR55 |
|
InsDiPrSt52- |
Insulator, Distribution, Porcelain, Strain, ANSI TR52 |
|
InsSdPrSp53- |
Insulator, Stud, Porcelain, Station Post, ANSI TR53 |
|
TrfOHCS25 |
Transformer, Overhead, CSP, 25kVA |
|
XrmFG10 |
Crossarm, Fiberglass, 10' |
|
XrmFg1P18 |
Crossarm, Fiberglass, Single Phase, 18" |
|
XrmFg2PDe36 |
Crossarm, Fiberglass, Two Phase, Deadend, 36" |
|
XrmFg36 |
Crossarm, Fiberglass, 36" |
|
XrmFg8 |
Crossarm, Fiberglass, 8' |
|
XrmFgDe10 |
Crossarm, Fiberglass, Deadend, 10' |
|
XrmFgDe8 |
Crossarm, Fiberglass, Deadend, 8' |
|
XrmWd10 |
Crossarm, Wood, 10' |
|
XrmWd8 |
Crossarm, Wood, 8' |
|
Block |
Description |